Low Cost Lawnmowers

Chute Blocker for Exmark® Radius® E/S Series mowers with UltraCutT series 3 deck sizes 48″, 52″, & 60, 2017-present. Radius X Series with UltraCutT series 4 also available, but listed separately. Full open/variable/full closed discharge control. Ultra simple/reliable/heavy duty tool for lawn professionals and homeowners running Exmark®. 30 second install/uninstall with no drilling required. Powder coated 7 gauge (3/16) steel, TIG welded. Made in the US! It balances the mower’s full and even discharge capabilities, with the ability to keep grass out of manicured landscape areas. Built with a strict adherence to simplicity, reliability, efficiency, and affordability, Speedtrap provides low maintenance, ultra-reliable, and user-friendly affordable discharge solutions to lawn professionals and home-owners alike. Speedtrap Chute blocker operation is controlled by hand with a rigid, yet flexible cable that is loosely attached near the operators controls for convenience. The Speedtrap allows operators various choices ranging between full discharge, variable angle deflection, and fully closed discharge blocking. The variable function of the Speedtrap provides a more custom approach to discharge, allowing operators the on-the-fly ability to quickly direct the angle of clipping disbursement, minimizing some of the typical pile ups that come from a full closure. As you approach a manicured area, simply reach down with your hand and pull on the cable, and the Speedtrap drops into the fully closed position, blocking discharge. Pull back on the cable again, and the chute will pivot back up into its resting position. Hold the plate partially open with the cable to allow continued discharge of clippings, at the angle which suits your needs. Various installs/demos can be seen at. As contractors ourselves, we know the demands of the commercial mowing arena. We know a timely shut down of discharge can either make or break a service, and the importance of increasing efficiency when and where we can. We ourselves needed a “set-and-forget” chute system that would: block grass on demand, do it quick and easy, hold up long term, and pop on and off for when we did our bagging. We needed it to be easy to operate, so whoever came on to mow for us could use and understand it. So we built the Speedtrap Chute, and it does just that! When it’s done right, simple just works! Bring us on board and let us come work for you, and you’ll see the Speedtrap become one of the most affordable and reliable improvements made to your mowing system. Exmark® and Radius® are registered trademarks of Exmark Mfg. Speedtrap Chute LLC is not affiliated with, nor endorsed by Exmark Mfg.

Speedtrap ChuteT Blocker for Exmark® Lazer Z® Next Gen mowers, deck sizes 48″, 52″, and 60, for model years 2011-present. 72 inch model also available, but listed separately. Full open/variable/full closed discharge control. Ultra simple/reliable/heavy duty tool for lawn professionals and homeowners running Exmark®. 30 second install/uninstall with no drilling required. Powder coated 7 gauge (3/16) steel, TIG welded. Made in the US! It balances capitalizing on the mower’s full and even discharge capabilities, with the ability to keep grass out of manicured landscape areas, such as closely located flower and mulch beds, and off of patios, sidewalks, and driveways etc. Every aspect of the Speedtrap ChuteT blocker was designed with the operator in mind and to provide the user(s) many years of continued reliable service. Built with a strict adherence to simplicity, reliability, efficiency, and affordability, we provide low maintenance, ultra-reliable, user friendly affordable discharge solutions to lawn professionals and home-owners alike, looking to improve safety, aesthetics, and operator efficiency. Speedtrap ChuteT blocker operation is controlled by hand with a rigid, yet flexible cable, that is loosely attached near the operators controls for convenience. They install quickly, and easily, getting you back to work fast. Once the factory unit is removed, install is typically half a minute for most models and requires no drilling. This easy on/off feature also benefits operators come fall, when switching between discharging and bagging. Various installs/demos can be seen at. The Speedtrap allows users many choices ranging between full discharge, manually controlled variable deflection, and fully closed discharge blocking. The variable function of the device provides a more custom approach to discharge, allowing the user the ability to quickly and temporarily direct and deflect grass clippings to meet their situational needs, and minimize some of the typical pile ups that come from a full closure, thus increasing their efficiency. As you approach a manicured area, simply reach down with your hand and pull on the cable until the chute plate drops into the fully closed position or into a variable position, depending on your situational needs. Once completing the area, pull back on the cable and the chute will pivot back into resting position. While in the variable positions, control and adjust the angle of deflection by holding the plate partially open with the cable, taking care to steer properly. After clearing the protected area, gently pull on the cable further, pivoting the chute plate back up into its resting position on the deck. As contractors ourselves, we know what the demands are out in the commercial mowing environment. We know that a timely shut down of discharge can either make or break a service, and also our reputations. We know how much inefficiency and down time costs, to our businesses and bottom lines, and the importance of increasing efficiency when and where we can. We have seen the need for affordable chute solutions for everybody from the part time weekend warrior trying to make extra cash, to the large firm trying to minimize their already out of control overhead. And we have experienced the headaches of time consuming and confusing installation procedures. We operate more from a “less-is-more-approach” aiming to keep things “ultra simple” for more time mowing and less time down. When it’s done right, simple just works! Bring us on board and let us come work for you, and you’ll see the Speedtrap become one of the most affordable and reliable improvements made to your mowing system. Come mow with us! Exmark® and Lazer Z® are registered trademarks of Exmark Mfg. Speedtrap Chute LLC is not affiliated with, nor endorsed by Exmark Mfg.

Speedtrap ChuteT Blocker for Toro® Z Master® mowers, deck sizes 48,52,60,72 2013-present. Full open/variable/full closed discharge control. Ultra simple/reliable/heavy duty tool for lawn professionals and homeowners running Toro®. 30 second install/uninstall with no drilling required. Powder coated 7 gauge (3/16) steel, TIG welded. Made in the US! It balances capitalizing on the mower’s full and even discharge capabilities, with the ability to keep grass out of manicured landscape areas, such as closely located flower and mulch beds, and off of patios, sidewalks, and driveways etc. Every aspect of the Speedtrap ChuteT blocker was designed with the operator in mind and to provide the user(s) many years of continued reliable service. Built with a strict adherence to simplicity, reliability, efficiency, and affordability, we provide low maintenance, ultra-reliable, user friendly affordable discharge solutions to lawn professionals and home-owners alike, looking to improve safety, aesthetics, and operator efficiency. Speedtrap ChuteT blocker operation is controlled by hand with a rigid, yet flexible cable, that is loosely attached near the operators controls for convenience. They install quickly, and easily, getting you back to work fast. Once the factory unit is removed, install is typically half a minute for most models and requires no drilling. This easy on/off feature also benefits operators come fall, when switching between discharging and bagging. Various installs/demos can be seen at. The Speedtrap allows users many choices ranging between full discharge, manually controlled variable deflection, and fully closed discharge blocking. The variable function of the device provides a more custom approach to discharge, allowing the user the ability to quickly and temporarily direct and deflect grass clippings to meet their situational needs, and minimize some of the typical pile ups that come from a full closure, thus increasing their efficiency. As you approach a manicured area, simply reach down with your hand and pull on the cable until the chute plate drops into the fully closed position or into a variable position, depending on your situational needs. Once completing the area, pull back on the cable and the chute will pivot back into resting position. While in the variable positions, control and adjust the angle of deflection by holding the plate partially open with the cable, taking care to steer properly. After clearing the protected area, gently pull on the cable further, pivoting the chute plate back up into its resting position on the deck. As contractors ourselves, we know what the demands are out in the commercial mowing arena. We know that a timely shut down of discharge can either make or break a service, and also our reputations. We know how much inefficiency and down time costs, to our businesses and bottom lines, and the importance of increasing efficiency when and where we can. We have seen the need for affordable chute solutions for everybody from the part time weekend warrior trying to make extra cash, to the large firm trying to minimize their already out of control overhead. And we have experienced the headaches of time consuming and confusing installation procedures. We operate more from a “less-is-more-approach” aiming to keep things “ultra simple” for more time mowing and less time down. When it’s done right, simple just works! Bring us on board and let us come work for you, and you’ll see the Speedtrap become one of the most affordable and reliable improvements made to your mowing system. Come mow with us! Toro®, and Z Master® are registered trademarks of The Toro Company. Speedtrap Chute LLC is not affiliated with, nor endorsed by The Toro Company.

Speedtrap ChuteT Blocker for Toro® Z Master mowers, deck sizes 52″, and 60″, for model years 2013-present. Full open/variable/full closed discharge control. Ultra simple/reliable/heavy duty tool for lawn professionals and homeowners running Toro®. 30 second install/uninstall with no drilling required. Powder coated 7 gauge (3/16) steel. Made in the US! It balances capitalizing on the mower’s full and even discharge capabilities, with the ability to keep grass out of manicured landscape areas, such as closely located flower and mulch beds, and off of patios, sidewalks, and driveways etc. Every aspect of the Speedtrap ChuteT blocker was designed with the operator in mind and to provide the user(s) many years of continued reliable service. Built with a strict adherence to simplicity, reliability, efficiency, and affordability, we provide low maintenance, ultra-reliable, user friendly affordable discharge solutions to lawn professionals and home-owners alike, looking to improve safety, aesthetics, and operator efficiency. Speedtrap ChuteT blocker operation is controlled by hand with a rigid, yet flexible cable, that is loosely attached near the operators controls for convenience. They install quickly, and easily, getting you back to work fast. Once the factory unit is removed, install is typically half a minute for most models and requires no drilling. This easy on/off feature also benefits operators come fall, when switching between discharging and bagging. Various installs/demos can be seen at. The Speedtrap allows users many choices ranging between full discharge, manually controlled variable deflection, and fully closed discharge blocking. The variable function of the device provides a more custom approach to discharge, allowing the user the ability to quickly and temporarily direct and deflect grass clippings to meet their situational needs, and minimize some of the typical pile ups that come from a full closure, thus increasing their efficiency. As you approach a manicured area, simply reach down with your hand and pull on the cable until the chute plate drops into the fully closed position or into a variable position, depending on your situational needs. Once completing the area, pull back on the cable and the chute will pivot back into resting position. While in the variable positions, control and adjust the angle of deflection by holding the plate partially open with the cable, taking care to steer properly. After clearing the protected area, gently pull on the cable further, pivoting the chute plate back up into its resting position on the deck. As contractors ourselves, we know what the demands are out in the commercial mowing environment. We know that a timely shut down of discharge can either make or break a service, and also our reputations. We know how much inefficiency and down time costs, to our businesses and bottom lines, and the importance of increasing efficiency when and where we can. We have seen the need for affordable chute solutions for everybody from the part time weekend warrior trying to make extra cash, to the large firm trying to minimize their already out of control overhead. And we have experienced the headaches of time consuming and confusing installation procedures. We operate more from a “less-is-more-approach” aiming to keep things “ultra simple” for more time mowing and less time down. When it’s done right, simple just works! Bring us on board and let us come work for you, and you’ll see the Speedtrap become one of the most affordable and reliable improvements made to your mowing system. Come mow with us! Toro® and Z Master®. Are registered trademarks of The Toro Company. Speedtrap Chute LLC is not affiliated with, nor endorsed by The Toro Company. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “speedtrap_chute” and is located in this country: US. This item can be shipped to United States.

• Compatible Brand: For Toro
• Brand: Toro
• Type: Operator Controlled Discarge Chute
• Manufacturer Warranty: 1 Year
• Number in Pack: 1
• Color: Black
• Compatible Model: Toro Z master
• Material: Steel
• Country/Region of Manufacture: United States
• Item Weight: 10 lb

Very Good Condition with Woods L59 Belly Mower with new belt. The item “1982 L235 Kubota Diesel with PTO, 912 Hours, second owner. Very Well Maintained” is in sale since Wednesday, March 18, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “slamplumber” and is located in Denton, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Engine Cylinders: 3
• Model Year: 1982
• Drive: 2WD
• Transmission: Manual
• Engine HP: 23.5
• Fuel Type: Diesel
• Equipment Type: Compact Tractor
• Make: Kubota