Low Cost Lawnmowers

StreetRays [Originals] Universal Swivel Chute Blocker Plate (Adjustable to fit Most Mower Decks). All StreetRays [originals] parts are CNC cut right here in Central Texas, USA. Where precision & Quality finish is the main focus. Our parts are all Laser cut & CNC formed on our Amada press brake for reliable fit. This mulch plate is fabricated from 10ga and 1/4 thick USA steel sheet. Specification: (No Instructions Included). Discharge Hole width coverage: 15″ to 20″ approx. Discharge Hole height coverage: 4″ to 5.5″ approx. Swivel Arm mounting depth (from edge of deck): 2″ to 4.5″ approx. Swivel Arm mounting height (from top of deck): 1″ to 3.0″ approx. Installation Notes: (No Instructions Included). The installation will require drilling 2 to 4 holes on your mower deck and will require assembly of the universal chute blocker plate to fit your mower discharge opening. Once you determine the height & depth where the swivel arms need to be mounted and where the 2 uprights (anchors on the deck) that the swivel arms will attach onto, you can go ahead drill the 2 or 4 holes for stability and mount the upright brackets onto your deck then simply unbolt the factory chute by undoing just a few bolts and attach our chute blocker plate with the provided nylon locking hardware and you’re done! Our Universal Swivel (open / close) Chute Blocker Plate is designed to fit almost all walk-behind and sit-down mower decks in the market. The installation will require drilling 2 to 4 holes on your mower deck and assemble the universal chute blocker plate to fit your mower discharge opening. Once you determine the height where the swivel arms need to be mounted, then simply unbolt the factory chute by undoing just a few bolts and attach our chute blocker plate with the provided nylon locking hardware and you’re done! Please note that you should NOT tighten the nuts all the way tight because the nylon locking nuts will ensure they stay in place, you need the nut to be loose because that’s how the chute blocker can open and close without interference. Now you have mulch machine! Or rather, you have a zero turn mower than won’t throw rocks or any hazard randomly at your house / car / window / etc. This is essential when you’re working on long overdue / heavily grassed / weeded areas.

Chute Blocker for Scag® Turf Tiger 2T, deck size 61. Full open/variable/full closed discharge control. Ultra simple/reliable/heavy duty tool for lawn professionals and homeowners running Scag. 2 minute install with no drilling required. Powder coated 7 gauge (3/16) steel, TIG welded. Made in the US! It balances the mower’s full and even discharge capabilities, with the ability to keep grass out of manicured landscape areas. Built with a strict adherence to simplicity, reliability, efficiency, and affordability, Speedtrap provides low maintenance, ultra-reliable, and user-friendly affordable discharge solutions to lawn professionals and home-owners alike. Speedtrap Chute blocker operation is controlled by hand with a rigid, yet flexible cable that is loosely attached near the operators controls for convenience. The Speedtrap allows operators various choices ranging between full discharge, variable angle deflection, and fully closed discharge blocking. The variable function of the Speedtrap provides a more custom approach to discharge, allowing operators the on-the-fly ability to quickly direct the angle of clipping disbursement, minimizing some of the typical pile ups that come from a full closure. As you approach a manicured area, simply reach down with your hand and pull on the cable, and the Speedtrap drops into the fully closed position, blocking discharge. Pull back on the cable again, and the chute will pivot back up into its resting position. Hold the plate partially open with the cable to allow continued discharge of clippings, at the angle which suits your needs. Various installs/demos can be seen at. As contractors ourselves, we know the demands of the commercial mowing arena. We know a timely shut down of discharge can either make or break a service, and the importance of increasing efficiency when and where we can. We ourselves needed a “set-and-forget” chute system that would: block grass on demand, do it quick and easy, hold up long term, and pop on and off for when we did our bagging. We needed it to be easy to operate, so whoever came on to mow for us could use and understand it. So we built the Speedtrap Chute, and it does just that! When it’s done right, simple just works! Bring us on board and let us come work for you, and you’ll see the Speedtrap become one of the most affordable and reliable improvements made to your mowing system. Speedtrap Chute LLC is not affiliated with, nor endorsed by Scag Power Equipment.

Ferris chute blocker for 36 stand on. This ferris chute blocker is made only for a Z1 36 stand on. This unit has 6 positions to choose from. Made right here in upstate NY.

This chute blocker is custom designed for the ferris Z1 48 deck.. All steel construction fabricated and designed right here in upstate NY. Models that this fits. Ferris Z1 48 stand on model. Snapper pro SS100 48. THIS WILL NOT FIT 36″ 52″ 61 we have other kits for those machines.

JOHN DEERE OEM CHUTE DEFLECTOR CABLE AM125293. Fits John Deere 1032D serial number below (-190000).

102, 105, 115, 125, 135. LA100, LA105, LA110, LA120, LA125, LA135.

INCLUDING SERIAL NUMBER RESTRICTIONS ON THE ABOVE MODELS. We reserve the right to cancel the sale of any item to anyone who is not the end user of the product. Our office is closed on weekends.

Please refer to the origional owners manual in order to verify this is correct part for your machine.

Please refer to the origional owners manual in order to verify this is correct part for your machine.

Fits: Ultra Vac QDS Lazer Z, Ultra Vac QDS Lazer Z AS, Ultra Vac QDS Lazer Z XP, Ultra Vac QDS Lazer Z XS, Ultra Vac QDS Next Lazer Z, Ultra Vac QDS Next Lazer Z AS, Ultra Vac QDS Next Lazer Z XP, Ultra Vac QDS Next Lazer Z XS Fits: Ultra Vac QDS Original Lazer Z AS, Ultra Vac QDS.