Low Cost Lawnmowers

THIS IS A MASTER REBUILD ENGINE KIT, FOR ALL KOHLER K301, M12, K301AQS, 301AS, 301A, WITH NEW VALVES, GASKET SET WITH SEALS, TUNEUP KIT INCLUDES POINTS, CONDENSER & SPARK PLUG. STANDARD PISTON WITH CHROME RINGS, WRIST PIN & CLIPS. CONNECTING ROD STANDARD, WE ALSO HAVE AVAILABLE. COMPLETE GASKET SET WITH SEALS. ONLINE KOHLER SHOP MANUAL AVAILABLE ON THE INTERNET. TORQUE ON CONNECTING ROD 260 INCH POUNDS. CYLINDER HEAD BOLTS 25-30 FOOT POUNDS. OIL PAN AND CLOSURE PLATE 35 FOOT POUNDS. NOTE: PROPER CONNECTING ROD INSTALLATION IS HOLE IN CONNECTING ROD CAP FACES THE CAMSHAFT. 12HP KOHLER BORE SPECS. NOTE: IF CYLINDER IS MORE THEN. 003 TAPER IT WILL NEED TO BE REBORED AS INSTALLING NEW PISTON AND RINGS IN A TAPER BORE THEY WILL PROBABLY CAUSE THE ENGINE TO SMOKE & BURN OIL. KOHLER RECOMMENDS AFTER HONING & OR REBORING THAT THE CYLINDER BE WASHED IN HOT SOAPY WATER TO ENSURE ARE GRIT FROM MACHINING IS REMOVED BEFORE THE NEW PARTS ARE INSTALLED IN THE ENGINE.

Set of 2 24×12.00-12 Turf Master Lawn Mower Tires Heavy Duty 6 Ply 24×12-12. Rim Width: 9.5. Tread Depth: 6.5mm. You might like this. Dog Seat Hammock Cover Car Suv Van Back Rear Mat. Electric 12V Kids Battery Ride On Car Toy Wheel Music. Popular School Student Desk and Chair Set Adjustable. 660lbs 300kg Weight Computing Floor Platform Scale. ZOKOP Multi-functional 16L 16.9QT Air Fryer XL Oven 1800W. 92 16:9 Material Foldable Electric Motorized. International Buyers – Please Note: a. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you. Work Time: Monday to Saturday. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. Work Time:Monday to Saturday.

Keep in mind this is a hydraulic brake component very much like automotive brake systems.

Note: This overhaul rebuild kit will fit Briggs & Stratton opposed engines only, WILL NOT FIT INTEK or VANGUARD engines WHICH ARE OVERHEAD VALVE! TWIN OPPOSED CYLINDER MODELS THAT START WITH EITHER 40 OR 42 in the model number, 400400, 400700, 401400, 401700, 402700, 404700, 402400 & 422700.

Max Loads (lbs): 1000.

The best products, the best prices! Our team works hard to find you the best deals and provide you with a wide selection of products. California Prop 65 – This product can expose you to certain chemicals, which are known to the State of California to cause cancer or birth defects or other reproductive harm.

Appications: Toro Z400, Z410, Z441, Z449, Z450, Z453, Z500 and Z528. Specs: Height: 7 1/2″ OD: 9 3/8″. This Item Includes: 3x Spindle Assembly. Toro Z400, Z410, Z441, Z449, Z450, Z453, Z500 and Z528. Height: 7 1/2″ OD: 9 3/8″. Replaces these part numbers. Referenced OE Part Number. International Buyers C Please Note. These charges are the buyers responsibility. Q: How do I return an item? Please contact our customer service before you return an item. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. Key or key case. Cylinder Piston Gasket Kit. Cylinder Head Gasket Sets. UTV & ATV Brake System Parts. Kevlar Carbon Brake Pads. Brake Rotors and Pads. Brake Drum & Shoes. Brake Calipers & pads. Brake Calipers & Rotors & pads. Nerf Bars & Running Boards. Mass Air Flow Sensor-MAF. Variable Timing Solenoid (VVT). Motorcycle Carburetor & Parts. ATV Rear Wheel Axle. ABS Wheel Speed Sensor. Idle air control valve. Transfer Case Shift Motor. Secondary Air Injection Pump. Spark Plug Ignition Wire. Air Cleaner Filter Box. Fuel Shut Off Solenoid. Air Ride Suspension Valves. Calipers & Rotors Pads. ATV Brake Master Cylinder. Throttle Cable Carb Bracket. Oil Fuel Hose Line. Wheel Hub Bearing Knuckle. Wheel Stem Air Valve Cap. Splash Guards & Mud Flaps. Light Bar Mount Bracket. Other Golf Cart Parts. 4 pcs wheel hub bearing. Other Handlebars & Levers. AC Compressor Control Valve+A. Car Window Film Tint Tools. Lower Kits & Parts. Pivot Brake Clutch Lever. Leveling kit + struts shocks. 12V Submersible Water Pump 1110GPH 70L/min Clean Clear Dirty Pool Pond Flood Kit. 1 HP Shallow Well Jet Pump Heavy Duty Water Jet Pump 110V w/ Pressure Switch. 4.0 GPM 1? Hollow Shaft Pressure New Power Washer pump 4000 PSI High Quality. Starter For Kohler 25-098-05 25-098-06 25-098-07 25-098-07-S 435-511 5802. PTO Clutch For Warner 5219-45 5219-19 Ariens Gravely Everride 00191700. PTO Clutch For SEARS CRAFTSMAN / YAZOO KEES 105406 539105406 WARNER 5218-83. PTO Clutch For Snapper 5100084S 5100084SM Warner 5218-134 Simplicity 5100084. PTO Clutch For GREAT DANE 00462500 BAD BOY 70-1000-00 WARNER 5218-220 5218-114. PTO Clutch For MASSEY FERGUSON / HUSQVARNA 104515 539104515 STENS 255-827.

Speedtrap ChuteT Blocker for Toro® Z Master® mowers, deck sizes 48,52,60,72 2013-present. Full open/variable/full closed discharge control. Ultra simple/reliable/heavy duty tool for lawn professionals and homeowners running Toro®. 30 second install/uninstall with no drilling required. Powder coated 7 gauge (3/16) steel, TIG welded. Made in the US! It balances capitalizing on the mower’s full and even discharge capabilities, with the ability to keep grass out of manicured landscape areas, such as closely located flower and mulch beds, and off of patios, sidewalks, and driveways etc. Every aspect of the Speedtrap ChuteT blocker was designed with the operator in mind and to provide the user(s) many years of continued reliable service. Built with a strict adherence to simplicity, reliability, efficiency, and affordability, we provide low maintenance, ultra-reliable, user friendly affordable discharge solutions to lawn professionals and home-owners alike, looking to improve safety, aesthetics, and operator efficiency. Speedtrap ChuteT blocker operation is controlled by hand with a rigid, yet flexible cable, that is loosely attached near the operators controls for convenience. They install quickly, and easily, getting you back to work fast. Once the factory unit is removed, install is typically half a minute for most models and requires no drilling. This easy on/off feature also benefits operators come fall, when switching between discharging and bagging. Various installs/demos can be seen at. The Speedtrap allows users many choices ranging between full discharge, manually controlled variable deflection, and fully closed discharge blocking. The variable function of the device provides a more custom approach to discharge, allowing the user the ability to quickly and temporarily direct and deflect grass clippings to meet their situational needs, and minimize some of the typical pile ups that come from a full closure, thus increasing their efficiency. As you approach a manicured area, simply reach down with your hand and pull on the cable until the chute plate drops into the fully closed position or into a variable position, depending on your situational needs. Once completing the area, pull back on the cable and the chute will pivot back into resting position. While in the variable positions, control and adjust the angle of deflection by holding the plate partially open with the cable, taking care to steer properly. After clearing the protected area, gently pull on the cable further, pivoting the chute plate back up into its resting position on the deck. As contractors ourselves, we know what the demands are out in the commercial mowing arena. We know that a timely shut down of discharge can either make or break a service, and also our reputations. We know how much inefficiency and down time costs, to our businesses and bottom lines, and the importance of increasing efficiency when and where we can. We have seen the need for affordable chute solutions for everybody from the part time weekend warrior trying to make extra cash, to the large firm trying to minimize their already out of control overhead. And we have experienced the headaches of time consuming and confusing installation procedures. We operate more from a “less-is-more-approach” aiming to keep things “ultra simple” for more time mowing and less time down. When it’s done right, simple just works! Bring us on board and let us come work for you, and you’ll see the Speedtrap become one of the most affordable and reliable improvements made to your mowing system. Come mow with us! Toro®, and Z Master® are registered trademarks of The Toro Company. Speedtrap Chute LLC is not affiliated with, nor endorsed by The Toro Company.

Speedtrap ChuteT Blocker for Toro® Z Master mowers, deck sizes 52″, and 60″, for model years 2013-present. Full open/variable/full closed discharge control. Ultra simple/reliable/heavy duty tool for lawn professionals and homeowners running Toro®. 30 second install/uninstall with no drilling required. Powder coated 7 gauge (3/16) steel. Made in the US! It balances capitalizing on the mower’s full and even discharge capabilities, with the ability to keep grass out of manicured landscape areas, such as closely located flower and mulch beds, and off of patios, sidewalks, and driveways etc. Every aspect of the Speedtrap ChuteT blocker was designed with the operator in mind and to provide the user(s) many years of continued reliable service. Built with a strict adherence to simplicity, reliability, efficiency, and affordability, we provide low maintenance, ultra-reliable, user friendly affordable discharge solutions to lawn professionals and home-owners alike, looking to improve safety, aesthetics, and operator efficiency. Speedtrap ChuteT blocker operation is controlled by hand with a rigid, yet flexible cable, that is loosely attached near the operators controls for convenience. They install quickly, and easily, getting you back to work fast. Once the factory unit is removed, install is typically half a minute for most models and requires no drilling. This easy on/off feature also benefits operators come fall, when switching between discharging and bagging. Various installs/demos can be seen at. The Speedtrap allows users many choices ranging between full discharge, manually controlled variable deflection, and fully closed discharge blocking. The variable function of the device provides a more custom approach to discharge, allowing the user the ability to quickly and temporarily direct and deflect grass clippings to meet their situational needs, and minimize some of the typical pile ups that come from a full closure, thus increasing their efficiency. As you approach a manicured area, simply reach down with your hand and pull on the cable until the chute plate drops into the fully closed position or into a variable position, depending on your situational needs. Once completing the area, pull back on the cable and the chute will pivot back into resting position. While in the variable positions, control and adjust the angle of deflection by holding the plate partially open with the cable, taking care to steer properly. After clearing the protected area, gently pull on the cable further, pivoting the chute plate back up into its resting position on the deck. As contractors ourselves, we know what the demands are out in the commercial mowing environment. We know that a timely shut down of discharge can either make or break a service, and also our reputations. We know how much inefficiency and down time costs, to our businesses and bottom lines, and the importance of increasing efficiency when and where we can. We have seen the need for affordable chute solutions for everybody from the part time weekend warrior trying to make extra cash, to the large firm trying to minimize their already out of control overhead. And we have experienced the headaches of time consuming and confusing installation procedures. We operate more from a “less-is-more-approach” aiming to keep things “ultra simple” for more time mowing and less time down. When it’s done right, simple just works! Bring us on board and let us come work for you, and you’ll see the Speedtrap become one of the most affordable and reliable improvements made to your mowing system. Come mow with us! Toro® and Z Master®. Are registered trademarks of The Toro Company. Speedtrap Chute LLC is not affiliated with, nor endorsed by The Toro Company. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “speedtrap_chute” and is located in this country: US. This item can be shipped to United States.

• Compatible Brand: For Toro
• Brand: Toro
• Type: Operator Controlled Discarge Chute
• Manufacturer Warranty: 1 Year
• Number in Pack: 1
• Color: Black
• Compatible Model: Toro Z master
• Material: Steel
• Country/Region of Manufacture: United States
• Item Weight: 10 lb

Toro Z588E Z Master Engine Management Module ECU / Kohler 2458458 / 74255. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “123.brit-brat” and is located in this country: US. This item can be shipped to United States.

• Brand: Kohler
• Type: Engine