THIS IS A MASTER REBUILD ENGINE KIT, FOR ALL KOHLER K301, M12, K301AQS, 301AS, 301A, WITH NEW VALVES, GASKET SET WITH SEALS, TUNEUP KIT INCLUDES POINTS, CONDENSER & SPARK PLUG. STANDARD PISTON WITH CHROME RINGS, WRIST PIN & CLIPS. CONNECTING ROD STANDARD, WE ALSO HAVE AVAILABLE. COMPLETE GASKET SET WITH SEALS. ONLINE KOHLER SHOP MANUAL AVAILABLE ON THE INTERNET. TORQUE ON CONNECTING ROD 260 INCH POUNDS. CYLINDER HEAD BOLTS 25-30 FOOT POUNDS. OIL PAN AND CLOSURE PLATE 35 FOOT POUNDS. NOTE: PROPER CONNECTING ROD INSTALLATION IS HOLE IN CONNECTING ROD CAP FACES THE CAMSHAFT. 12HP KOHLER BORE SPECS. NOTE: IF CYLINDER IS MORE THEN. 003 TAPER IT WILL NEED TO BE REBORED AS INSTALLING NEW PISTON AND RINGS IN A TAPER BORE THEY WILL PROBABLY CAUSE THE ENGINE TO SMOKE & BURN OIL. KOHLER RECOMMENDS AFTER HONING & OR REBORING THAT THE CYLINDER BE WASHED IN HOT SOAPY WATER TO ENSURE ARE GRIT FROM MACHINING IS REMOVED BEFORE THE NEW PARTS ARE INSTALLED IN THE ENGINE.
BRAND NEW CYLINDER HEAD, HEAD GASKET & SPARK PLUG FITS THESE KOHLER K241 K301 K321 M10 M12 M14, CAST IRON K SERIES AND MAGNUM SERIES CYLINDER HEAD REPLACEMENT, CYLINDER HEAD IS POWERED COATED TO KEEP FROM CORRISON. THIS IS A STOCK CYLINDER HEAD REPLACEMNT AND IS DESIGNED AFTER THE PRIGINAL 4TH GENERATION HEAD DESIGN FROM KOHLER. THE SPARKPLUG IS LOCATED DIRECTLY ABOVE THE EXHAUST VALVE. THIS CYLINDER HEAD WILL REPLACE ALL PREVOUIS CYLINDER HEAD DESIGNS ON YOUR KOHLER K SERIES AND MAGNUM SERIES THAT USE PART NUMBER 47-015-06-S OR 230670-S. NOTE: THESE HIGH QUALITY MADE CYLINDER HEAD, HEAD GASKET & SPARK PLUG ARE NOT MADE IN TAIWAN OR CHINA.
2x Piston & Rings Kits. 1x Crankcase Side Cover Gasket. 2x Cylinder Head Gasket. 2x Valve Cover Gaskets. 1x Crankshaft Oil Seal. 1x Low Oil Sensor. COMBINED ORDERS: We will combine all orders when possible.
2 PISTON RING SETS, GASKETS & SEALS FITS BRIGGS & STRATTON 350400, 350700, 351700, REPLACES BRIGGS & STARTTON PART NUMBERS 843793, 807889. FITS BRIGGS & STRATTON TWIN CYLINDER VANGUARD ENGINES WITH A 72MM BORE 2.835. NOTE: THESE HIGH QUALITY MADE PISTON RINGS ARE NOT MADE IN TAIWAN OR CHINA.
Package Includes: 1 x Engine Block 1 x Piston 1 x Ring set 1 x Connecting Rod 1 x Full Gasket Set 2 x Oil Seals 1 x Straight Crank Shaft Specification & Feature: 100% Brand new and never been used. Stable characteristics, high reliability. Fit For:Honda GX340 11HP and GX390 13HP No installation instruction included, professional installation is highly recommended. For Honda GX390 W/ Crankshaft 13HP Rebuild Kit Piston Con Rod Gasket Set Block. 100% Brand new and never been used. Fit For:Honda GX340 11HP and GX390 13HP. No installation instruction included, professional installation is highly recommended. 1 x Engine Block. 1 x Ring set. 1 x Connecting Rod. 1 x Full Gasket Set. 2 x Oil Seals. 1 x Straight Crank Shaft. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
For Daihatsu for Briggs & Stratton 825527 Engine Gasket Set Overhaul. This will also work for a DM850 it takes a. This rebuild kit is for Daihatsu made by Briggs & Stratton. We at M & M Products are a stocking distributor for Briggs and Stratton, Kohler, Toro dealer. We not only sell their OEM parts we also use them on our equipment repairs and rebuilds. If there is something you need and don’t see.
Package Includes: 1 x Engine Block 1 x Piston 1 x Ring set 1 x Connecting Rod 1 x Full Gasket Set 2 x Oil Seals 1 x Straight Crank Shaft Specification & Feature: 100% Brand new and never been used. Stable characteristics, high reliability. Fit For:Honda GX340 11HP and GX390 13HP No installation instruction included, professional installation is highly recommended.
2 EACH INTAKE & EXHAUST VALVES.
THESE HIGH QUALITY MADE PISTONS ARE FOR STANDARD BORE FOR THESE ONAN ENGINES, B43, B48, P216, P218, P220, BORE 3.250 STANDARD BORE, THESE PISTONS ARE THE SAME WEIGHT AS THE OEM ONAN PISTON. COMPLETE GASKET SET & SEALS. NOTE: THESE HIGH QUALITY MADE PISTON KITS, GASKETS & SEALS ARE NOT MADE IN TAIWAN OR CHINA. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “llrdbrn” and is located in this country: US. This item can be shipped to United States.
Package Includes: 1 x Engine Block 1 x Piston 1 x Ring set 1 x Connecting Rod 1 x Full Gasket Set 2 x Oil Seals 1 x Straight Crank Shaft Fits: For Honda GX340 11HP and GX390 13HP Specification & Feature: 100% Brand new and never been used. Stable characteristics, high reliability. No installation instruction included, professional installation is highly recommended. Crankshaft Rebuild Kit Engine Block Full Gasket kit For Honda GX390 13HP/GX340. 1 X Engine Block. 1 X Ring Set. 1 X Connecting Rod. 1 X Full Gasket Set. 2 X Oil Seals. 1 X Straight Crank Shaft. For Honda Gx340 11hp and Gx390 13hp. 100% Brand New and Never Been Used. Stable Characteristics, High Reliability. No Installation Instruction Included. Professional Installation Is Highly Recommended. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “yiyibushe-3″ and is located in this country: US. This item can be shipped to United States.