Low Cost Lawnmowers

Kohler cylinder head and NOS OEM Kohler cylinder head gasket. No longer available new, this head has been bead blasted and mating surface machined perfectly flat. Spark plug threads are perfect as are both engine tin mounting threads. No broken or damaged cooling fins either. Fits Kohler K341 16HP engines. Comes with a small package of anti-seize to apply on spark plug threads so that future replacement of spark plug doesn’t cause damage to threads, and two new grade 8 mounting bolts for the engine tins. Everything you need to get back to work quick. NOTE: Hairline cracks are a common occurrence and can’t be seen under a layer of carbon. Look closely at any used cylinder head for tiny cracks near the spark plug threads and between the valves. These are common issues which is why we bead blast ours and then have them inspected and machined by trained machinists who also torque test all threads. We only use OEM Kohler cylinder head gaskets as aftermarket gaskets are about half as thick and have no insulating material like genuine Kohler gaskets do. Purchasing a used cylinder head which hasn’t been cleaned and properly inspected is a risky venture. Many sellers will list heads without regard to its condition. Some 90% of the heads we remove from good running engines are warped to some degree and are not suitable for use unless they are machined. Doing the job right the first time will increase your tractor’s productivity and insure your engine operates up to its full potential. Don’t take that chance! Did you know that carbon buildup on heads acts similar to a sponge and absorbs raw fuel which contributes to poor cold starting conditions and rough operation when engine is running? Any major tune-up should include the removal and decarbonizing of the head. Removing any paint and grease from exterior of head promotes more efficient cooling by allowing heat to travel to cooling fins where it can dissipate into the air. We don’t paint our heads as doing so prevents equal heat dissipation through the cooling fins. Always insure the engine tins are installed. They force air to flow through the cooling fins on the cylinder and the head. Otherwise air will take the path of least resistance and flow around the engine. Lastly, check the screen on the flywheel and make sure it’s clear of grass clippings and debris. Cool air is pulled in through the screen but if it’s plugged the engine will not be cooled. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “loger.r2″ and is located in this country: US. This item can be shipped to United States.

• Horsepower: 16 HP
• Type: Cylinder Head
• MPN: 45-015-09 , IH-117120-C1
• Brand: Kohler

New Fuel Pump Replacement for Kohler, John Deere, Gravely. Fitment : They are for. Replaces OEM# Gravely: 38789 John Deere: AM134269 Kohler: 47 393 19-S, 47 559 01-S, 47 559 03, 47 559 04-S, 47 559 05-S, 47 559 11-S, A-236205-S, It Fits Models: Kohler: K241-K341 and M10-M12 Engines Series Specifications: Includes gaskets Inlet and outlet are at a 90º Angle to arm Twist lock fit 1 5/8″ arm length Fits 1/4″ ID fuel line. The item “Fuel Pump for John Deere AM134269 Gravely 38789 Kohler K241 K341 M10 M12 Engine” is in sale since Friday, September 22, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “x-motors” and is located in Rowland Heights, California. This item can be shipped to United States.

• Non-Domestic Product: No
• Model: K-241, K301, K321 and K341 Engines
• Modified Item: No
• Custom Bundle: No
• Type: Fuel Pump
• MPN: AM134269
• Brand: x-motors

New Fuel Pump Replacement for Kohler, John Deere, Gravely. Fitment : They are for. Replaces OEM# Gravely: 38789 John Deere: AM134269 Kohler: 47 393 19-S, 47 559 01-S, 47 559 03, 47 559 04-S, 47 559 05-S, 47 559 11-S, A-236205-S, It Fits Models: Kohler: K241-K341 and M10-M12 Engines Series Specifications: Includes gaskets Inlet and outlet are at a 90º Angle to arm Twist lock fit 1 5/8″ arm length Fits 1/4″ ID fuel line. The item “New Fuel Pump For Kohler K-Series K241 K301 K321 K341 10 12 14 16 HP Engines” is in sale since Monday, December 11, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “x-motors” and is located in Rowland Heights, California. This item can be shipped to United States, Canada.

• Non-Domestic Product: No
• Model: K-241, K301, K321 and K341 Engines
• Modified Item: No
• Custom Bundle: No
• Type: Fuel Pump
• MPN: K241,K341
• Brand: x-motors

PISTON STD AND ROD STD. This is for all the K341 and M16 engines including K341A, K341AS, K341AQS or any k341with any suffix on it. Kit includes : EVERYTHING TO MAKE YOUR K341 ENGINE LIKE NEW AGAIN. What you see in the picture is what you will receive plus a Kohler rebuilding manual at www. KIT INCLUDES TH E FOLLOWING. New Piston : PISTON COMES IN choice of : Standard, . 010 over, 020 over or. Wrist pin and Keepers. CONNECTING ROD COMES IN : Standard or. I will send standard size PERIOD! 020 rod without paying for it!!!! Engine rebuilding manual on the internet by doing a google search. A nybody can Rebuild a Kohler engine themselves. 3.760 = +. 010 Piston and Rings and 1.5 = Standard Rod. Do not give me the measurment, give me the size. When measuring cylinder bore, please measure the cylinder wall approx. 1inch down the cylinder wall for correct measurement. 16 HP STANDARD Cylinder Bore 3.750. These measurments are not for machine shop referance. The machine shop needs the NEW piston before they can bore the cylinder. If they try and bore your block without having the piston, go to a different machine shop +. 010 3.760 +. 020 3.770 +. 040 3.790 CONNECTING ROD. Std 1.50″ or. 010 1.490″. 020 and not paying for it does not work and a 010 rod will be sent. (MOST COMMON FAILURE ON A NEW REBUILT ENGINE IS IMPROPER ROD INSTALLATION), I WILL GIVE YOU THE SHEET THAT TELLS YOU HOW TO INSTALL THE ROD PROPERLY (The oil hole goes toward the cam). Also a FREE instructions on Kohler engine rebuilding on the internet by doing a google search for Kohler engine manuals. If interested I offer a 16 HP rebuild with a Free!!! Tune Up In my other auctions and valves. In my store and my other auctions. I also offer high Quality, cost saving tools and other COMPLETE Engine Rebuild, Refresh Engine Rebuild Kits to rebuild your own engine, so please check out my other auctions for tools, lawn, tractor seats and other rebuild kits. PLEASE FEEL FREE TO VIEW OUR. The item “ENGINE REBUILD KIT for KOHLER 16HP K341 and M16 piston std and rod std” is in sale since Sunday, April 23, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers\Lawn Mower Parts & Accessories”. The seller is “bakt4kids” and is located in Wauseon, Ohio. This item can be shipped worldwide.

• Model: all K341 and M16
• Type: Piston
• MPN: Does Not Apply
• Brand: for Kohler

Replaces OEM# Gravely: 38789 John Deere: AM134269 Kohler: 47 393 19-S, 47 559 01-S, 47 559 03, 47 559 04-S, 47 559 05-S, 47 559 11-S, A-236205-S. Fits Models: Kohler: K241-K341 and M10-M12. Specifications: Includes gaskets Inlet and outlet are at a 90º Angle to arm Twist lock fit 1 5/8″ arm length Fits 1/4″ ID fuel line. Established in 1970, EPR Distribution specializes in a wide variety of products and parts ranging from Landscape Equipment and Parts to Sporting Goods. The best products, the best prices! Our team works hard to find you the best deals and provide you with a wide selection of products. Friendly, accessible customer service! Our dedicated and friendly customer service agents are here to help you with all your questions and concerns. Feel free to send us a message directly and one of our agents will get back to you as soon as possible. However, we cannot guarantee the cancellation. California Prop 65 – This product can expose you to certain chemicals, which are known to the State of California to cause cancer or birth defects or other reproductive harm. Powered by SixBit’s eCommerce Solution. The item “Fuel Pump Kohler K-Series K241 K301 K321 K341 10 12 14 16 HP Engines” is in sale since Monday, June 15, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers\Lawn Mower Parts & Accessories”. The seller is “eprdistribution” and is located in Elgin, Illinois. This item can be shipped to United States, Mexico, Germany, Japan, Brazil.

• Type: Fuel Pump
• Brand: Replaces Kohler
• MPN: 47 559 04, 47-559-04S, 4755904
• Model: K-241, K301, K321 and K341 Engines
• UPC: Does Not Apply

This is the ultimate engine restoration kit for Kohler K341 Cast Iron 16HP Engines with Battery Ignition System. It includes everything you need to make your engine run like brand new again! There is no other rebuild kit available as comprehensive as ours. The photo is our stock photo used for all of the rebuild kits for K241, K301, K321, and K341. This kit will include the Style “C” piston with the partial piston skirt. 20 Piece Gasket Set including Oil Seals. Intake and Exhaust Valves. Wrist Pin and Clips. Carburetor Ball Joint Linkage. Additional style carburetor choke for old style engines. Points w/mounting bracket and Condenser. Ignition Coil with mounting bracket. We offer this kit in STD. Please leave us a note on checkout and tell us which Rod, and Piston you need, and we will build it that way for you. We can help you troubleshoot your engine, install parts, and give you maintenance advice! We Don’t Just Sell Parts. We rebuild and restore engines and equipment every day. If you need any help at all with your Tractor Project, let us know and we will help you keep your tractor going for 100 years. We are Tractor Nerds and Certified EETC Technicians. We process orders FAST! So your equipment can be put back into service quickly. 2016-12-23 13:04:05. 2016-11-29 03:02:53. 2016-09-19 16:30:22. 2016-04-29 01:12:41. 2016-03-28 20:06:40. The item “The Ultimate Engine Restoration Rebuild Kit Kohler K341 16HP Cast Iron Engines” is in sale since Tuesday, January 26, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawnmowers\Parts & Accessories”. The seller is “isavetractors” and is located in Hollis Center, Maine. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion.

• Type: Engine Rebuild Kit
• Model: K341
• Brand: iSaveTractors
• MPN: Does Not Apply

Standard rod and standard piston. With valves and tune up as shown in the picture. Do not be fooled! Want your parts FAST! The more we sell the cheaper our prices get! Master ENGINE REBUILD KIT with valves and free tune up and rebuilding manual web site. This is for all the M16 and K341 engines including K341A, K341AS, K341AQS or any K341with any suffix on it. Kit includes : EVERYTHING TO MAKE YOUR K341 ENGINE LIKE NEW AGAIN with standard piston and standard rod. What you see in the picture is what you will receive plus a rebuilding manual web site for all kohler engines. KIT INCLUDES THE FOLLOWING. PISTON COMES IN : Standard only, although I do have in larger sizes in my other auctions. Wrist pin and Keepers. 1 – 16hp rod, not a 12hp Connecting Rod. The 16 hp CONNECTING ROD COMES IN : Standard only, although I do have in larger sizes in my other auctions. Intake and exhaust valves. If you are unsure what you will recieve, you can also see the picture. Anybody can Rebuild a Kohler engine themselves. 3.760 = +. 010 Piston and Rings and 1.5 = Standard Rod. When measuring cylinder bore, please measure the cylinder wall approx. 1 inch down the cylinder wall for correct measurement. 16 HP STANDARD Cylinder Bore 3.750 These measurments are not or machine shop use. The machine shop MUST have the new piston before they can bore your cylinder. If the machine shop tries to bore your block before they have the new piston, go to a different machine shop because it can not be done! 010 3.760 (In my other auctions I have the larger sizes) +. 020 3.770″ ” ” ” +. 030 3.780″ ” ” ” STANDARD CONNECTING ROD 1.500″. 010 ROD 1.490″ and 1.480. (MOST COMMON FAILURE ON A NEW REBUILT ENGINE IS IMPROPER ROD INSTALLATION), I WILL GIVE YOU THE SHEET THAT TELLS YOU HOW TO INSTALL THE ROD PROPERLY. Also a FREE information on Kohler engine rebuilding. 020 connecting rod in place of the std or. I will not send a. 020 rod unless you pay for a. You must replace if you have the aluminum one. I also offer high Quality, cost saving tools and other COMPLETE Engine Rebuild, Refresh Engine Rebuild Kits to rebuild your own engine, so please check out my other auctions for tools, lawn, tractor seats and other rebuild kits. PLEASE FEEL FREE TO VIEW OUR FEEDBACKS. The item “Kohler 16hp K341 master rebuild kit withvalves, standard piston and rod withtune up” is in sale since Thursday, April 17, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawnmowers\Parts & Accessories”. The seller is “bakt4kids” and is located in Wauseon, Ohio. This item can be shipped worldwide.

• Type: Engine
• Brand: Kohler
• MPN: Does Not Apply
• Model: K341 and M16

This is for all the K341 and M16 engines including K341A, K341AS, K341AQS or any k341with any suffix on it. Kit includes : EVERYTHING TO MAKE YOUR K341 ENGINE LIKE NEW AGAIN. What you see in the picture is what you will receive plus a Kohler rebuilding manual at www. KIT INCLUDES TH E FOLLOWING. New Piston : PISTON COMES IN choice of : Standard, . 010 over, 020 over or. Wrist pin and Keepers. CONNECTING ROD COMES IN : Standard or. I will send standard size PERIOD! 020 rod without paying for it!!!! Anybody can Rebuild a Kohler engine themselves. 3.760 = +. 010 Piston and Rings and 1.5 = Standard Rod. Do not give me the measurment, give me the size. When measuring cylinder bore, please measure the cylinder wall approx. 1inch down the cylinder wall for correct measurement. 16 HP STANDARD Cylinder Bore 3.750. These measurments are not for machine shop referance. The machine shop needs the NEW piston before they can bore the cylinder. If they try and bore your block without having the piston, go to a different machine shop +. 010 3.760 +. 020 3.770 +. 040 3.790 CONNECTING ROD. Std 1.50 or. 020 and not paying for it does not work and a 010 rod will be sent. (MOST COMMON FAILURE ON A NEW REBUILT ENGINE IS IMPROPER ROD INSTALLATION), I WILL GIVE YOU THE SHEET THAT TELLS YOU HOW TO INSTALL THE ROD PROPERLY (The oil hole goes toward the cam). If interested I offer a 16 HP rebuild with a Free!!! Tune Up In my other auctions and valves. In my store and my other auctions, You can call me at. If you need help. I also offer high Quality, cost saving tools and other COMPLETE Engine Rebuild, Refresh Engine Rebuild Kits to rebuild your own engine, so please check out my other auctions for tools, lawn, tractor seats and other rebuild kits. PLEASE FEEL FREE TO VIEW OUR FEEDBACKS. Try the all-New Andale Gallery. Now with “Smart” Features. Try First Month FREE. Get Vendio Gallery – Now FREE! The item “ENGINE REBUILD KIT for KOHLER 16HP K341 and M16 with an actual 16hp rod not 12hp” is in sale since Thursday, April 17, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawnmowers\Parts & Accessories”. The seller is “bakt4kids” and is located in Wauseon, Ohio. This item can be shipped worldwide.

• Brand: fits kohler
• Model: all K341 and M16

Kohler k341 16hp engine carburetor john deer tractor 316 club cadet 1600 1650. Top quality replacement parts. Please check against picture. We strive for 5 star ratings. We will go out of our way to make you happy. If for any reason you can not give us a five star rating. Transit time: between 6-10 days. Times may vary due to customs, clearance and your local postal service. The item must be in the original packaging.The item “Kohler K341 16hp Engine Carburetor John Deer Tractor 316 Club Cadet 1600 1650″ is in sale since Tuesday, October 21, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawnmowers\Parts & Accessories”. The seller is “deezeeauto” and is located in Lapeer, Michigan. This item can be shipped worldwide.

• Type: AE-PARTS
• Model: M16
• Part: John Deer Tractor CARB CARBURETOR
• Warranty: Yes

Kohler k341 16hp engine carburetor john deer tractor 316 club cadet 1600 1650. We strive for 5 star ratings. We will go out of our way to make you happy. If for any reason you can not give us a five star rating. Transit time: between 6-10 days. Times may vary due to customs, clearance and your local postal service. The item must be in the original packaging.The item “Kohler K341 16hp Engine Carburetor John Deer Tractor 316 Club Cadet 1600 1650″ is in sale since Wednesday, May 21, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawnmowers\Parts & Accessories”. The seller is “deezeeauto” and is located in Lapeer, Michigan. This item can be shipped worldwide.

• Type: AE-PARTS
• Model: M16
• Part: John Deer Tractor CARB CARBURETOR
• Warranty: Yes