Low Cost Lawnmowers

THIS IS A MASTER REBUILD ENGINE KIT, FOR ALL KOHLER K301, M12, K301AQS, 301AS, 301A, WITH NEW VALVES, GASKET SET WITH SEALS, TUNEUP KIT INCLUDES POINTS, CONDENSER & SPARK PLUG. STANDARD PISTON WITH CHROME RINGS, WRIST PIN & CLIPS. CONNECTING ROD STANDARD, WE ALSO HAVE AVAILABLE. COMPLETE GASKET SET WITH SEALS. ONLINE KOHLER SHOP MANUAL AVAILABLE ON THE INTERNET. TORQUE ON CONNECTING ROD 260 INCH POUNDS. CYLINDER HEAD BOLTS 25-30 FOOT POUNDS. OIL PAN AND CLOSURE PLATE 35 FOOT POUNDS. NOTE: PROPER CONNECTING ROD INSTALLATION IS HOLE IN CONNECTING ROD CAP FACES THE CAMSHAFT. 12HP KOHLER BORE SPECS. NOTE: IF CYLINDER IS MORE THEN. 003 TAPER IT WILL NEED TO BE REBORED AS INSTALLING NEW PISTON AND RINGS IN A TAPER BORE THEY WILL PROBABLY CAUSE THE ENGINE TO SMOKE & BURN OIL. KOHLER RECOMMENDS AFTER HONING & OR REBORING THAT THE CYLINDER BE WASHED IN HOT SOAPY WATER TO ENSURE ARE GRIT FROM MACHINING IS REMOVED BEFORE THE NEW PARTS ARE INSTALLED IN THE ENGINE.

BRAND NEW CYLINDER HEAD, HEAD GASKET & SPARK PLUG FITS THESE KOHLER K241 K301 K321 M10 M12 M14, CAST IRON K SERIES AND MAGNUM SERIES CYLINDER HEAD REPLACEMENT, CYLINDER HEAD IS POWERED COATED TO KEEP FROM CORRISON. THIS IS A STOCK CYLINDER HEAD REPLACEMNT AND IS DESIGNED AFTER THE PRIGINAL 4TH GENERATION HEAD DESIGN FROM KOHLER. THE SPARKPLUG IS LOCATED DIRECTLY ABOVE THE EXHAUST VALVE. THIS CYLINDER HEAD WILL REPLACE ALL PREVOUIS CYLINDER HEAD DESIGNS ON YOUR KOHLER K SERIES AND MAGNUM SERIES THAT USE PART NUMBER 47-015-06-S OR 230670-S. NOTE: THESE HIGH QUALITY MADE CYLINDER HEAD, HEAD GASKET & SPARK PLUG ARE NOT MADE IN TAIWAN OR CHINA.

JOHN DEERE 212 CRANKSHAFT. Crankshaft is in good working condition, from running engine, light wear and faint oil discoloring but journal looks clean, standard size, 1 output shaft, keyway fit tight. Used on similar models 212 112, may fit others. From a John Deere model 212 serial #193543, with 12hp Kohler engine. Engine model K301AQS, spec 47640, eng serial 11308642. We will list as accurately as we can, may also fit similar makes & models. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “accc8777″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.

• Brand: John Deere
• Type: Not Specified

Cylinder Head for Kohler K241 K301 K321 M10 M12 M14 Engines. ISaveTractors Replacement Cylinder Head for Kohler K241, K301, K321, M10, M12, M14 10HP, 12HP, and 14HP Cast Iron Single Cylinder Engines and Magnum Engines. This is a stock replacement and is modeled after the original 4th generation cylinder head design. The spark plug is located directly above the exhaust valve. The cylinder head can replace all previous cylinder head designs on your original Kohler engine. The gasket surface is machined perfectly flat and ready to install. Not all Aftermarket Carburetors and Companies are created equal. Here at iSaveTractors we are actual small tractor and small engine re-builders based in Maine, USA. We will guide you throughout your entire engine rebuilding process and make sure you get the correct parts. Make iSaveTractors your Engine Rebuilding Partner. We can help you troubleshoot your engine, install parts, and give you maintenance advice! We Don’t Just Sell Parts. We rebuild and restore engines and equipment every day. If you need any help at all with your Tractor Project, let us know and we will help you keep your tractor going for 100 years. We are Tractor Nerds and Certified EETC Technicians. We process orders FAST! So your equipment can be put back into service quickly. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “isavetractors” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

• Horsepower: 10HP, 12HP, 14HP
• Model: K241 K301 K321 M10 M12 M14
• Type: Engine
• Number in Pack: 1
• Brand: iSaveTractors
• UPC: 8809093351738

These are OEM Kohler cylinder heads, not the cheaper lightweight Chinese imitations that warp easily due to the inferior aluminum used in manufacturing. Head has been bead blasted and mating surface machined perfectly flat. Spark plug threads are perfect as are both engine tin mounting threads. No broken or damaged cooling fins either. Fits K241 K301 K321 10, 12, and 14 HP engines. Comes with a small package of anti-seize to apply on spark plug threads so that future replacement of spark plug doesn’t cause damage to threads, and two new mounting bolts for the engine tins. Everything you need to get back to work quick. We don’t paint our heads, doing so can cause heat to be retained which can cause uneven cooling leading to carbon build-up and hard cold starts. Purchasing a used cylinder head which hasn’t been cleaned and inspected is a risky venture. Most are filthy and cannot possibly have been properly checked with a straight edge. Buyers install the used head and a few hours of running time later are left stranded on their tractor with a blown head gasket. Many sellers will list heads without regard to its condition. They remove the head, take a quick picture, then post it for sale. Some 90% of the heads we remove from good running engines are warped to some degree and are not suitable for use unless they are machined. Doing the job right the first time will save you time, labor, increase your tractor’s productivity, and ensure your engine operates up to its full potential. Did you know that carbon buildup on the cylinder head acts similar to a sponge and absorbs raw fuel which contributes to poor cold starting conditions and rough operation when engine is running? Any major tune-up should include the removal and decarbonizing of the head. Removing any paint and grease from exterior of head promotes more efficient cooling by allowing heat to travel to cooling fins where it can dissipate into the air. Always insure the engine tins are installed. They force air to flow through the cooling fins on the cylinder and the head. Otherwise air will take the path of least resistance and flow around the engine. Lastly, check the screen on the flywheel and make sure it’s clear of grass clippings and debris. Cool air is pulled in through the screen and if it’s restricted it will greatly decrease the volume of air needed for cooling. We’re proud to offer the absolute highest level of service to our customers, and we’re equally proud of what they have to say about us. We love these tractors as much as you do and take pride in the quality of used parts we sell. But if you think our price is a little too high, then submit a best offer. You’ll usually hear back from us within a few hours. We don’t sell anything we wouldn’t install on our own machines. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “loger.r2″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, Ukraine, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Russian Federation.

• Horsepower: 10, 12, 14
• Model: K241 K301 K321
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Type: Cylinder Head
• MPN: 237670-S , 237670
• Modified Item: No
• Non-Domestic Product: No
• Brand: Kohler, Cub Cadet John Deere

K301 12hp Kohler with piston. 010 with valves and tune up. This is for ALL the K301 and M12 Kohler engines, which means that it will fit all the K301s regardless of the suffix. THESE ARE CUSTOMIZED by Myself so the KITS is made to MEET YOUR ENGINE REBUILDING NEEDS. KIT INCLUDES THE FOLLOWING. 1- New Piston: PISTON COMES IN. 010 w/Chrome Piston Rings. Wrist pin and Keepers. CONNECTING ROD COMES IN. Intake Valve 1.372″ Exhaust Value 1.125″. Get a free download manual on the Kohler web site. 12hp K301 These measurements are not for machine shop reference. The machine shop must have the new piston before they can bore the cylinder Standard cylinder bore…….. 3.385 (This is what I will send with this order). 010……………………………….1.490 (this is what I will send with this order). 020 1.480. I will also give the instructions on how to properly install your connecting rod. (Oil hole goes towards the cam) The most common reason for premature engine failure on your rebuilt engine is an improper rod installation. In my other auctions, I also offer high Quality, cost saving tools and other COMPLETE Engine Rebuild, Refresh Engine Rebuild Kits to rebuild your own engine, so please check out my other auctions for tools, lawn, tractor seats and other rebuild kits. Thanks, Kevin Thanks For Looking! This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “bakt4kids” and is located in this country: US. This item can be shipped worldwide.

• Model: K301 and M12
• Type: Valve
• Power: Gas
• Product Type: Engine rebuild
• Lawn Mower Type: Lawn Mower Parts & Accessories
• Brand: for Kohler

New Fuel Pump Replacement for Kohler, John Deere, Gravely. Fitment : They are for. Replaces OEM# Gravely: 38789 John Deere: AM134269 Kohler: 47 393 19-S, 47 559 01-S, 47 559 03, 47 559 04-S, 47 559 05-S, 47 559 11-S, A-236205-S, It Fits Models: Kohler: K241-K341 and M10-M12 Engines Series Specifications: Includes gaskets Inlet and outlet are at a 90º Angle to arm Twist lock fit 1 5/8″ arm length Fits 1/4″ ID fuel line. The item “New Fuel Pump For Kohler K-Series K241 K301 K321 K341 10 12 14 16 HP Engines” is in sale since Monday, December 11, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “x-motors” and is located in Rowland Heights, California. This item can be shipped to United States, Canada.

• Non-Domestic Product: No
• Model: K-241, K301, K321 and K341 Engines
• Modified Item: No
• Custom Bundle: No
• Type: Fuel Pump
• MPN: K241,K341
• Brand: x-motors

We are by far the best value. They go on mowers and pulling tractors all over the world! This is for ALL the K301 and M12 Kohler engines, which means that it will fit all the K301and M12 engines regardless of the suffix. CUSTOMIZED TO MEET YOUR ENGINE REBUILD NEEDS….. KIT INCLUDES THE FOLLOWING. 1- New Piston: PISTON COMES IN choice of: Standard. 040 over, with Chrome Piston Rings. Wrist pin and Keepers. CONNECTING ROD COMES IN choice of: Standard, 010 or 020 undersized. Intake Valve 1.372. Exhaust Value 1.125. 12hp K301 These measurements are not for machine shop reference. The machine shop must have the new piston before they can bore the cylinder. Anybody can Rebuild a Kohler engine themselves. Kohler INSTRUCTION manual ON HOW TO REBUILD YOUR KOHLER ENGINE off the Kohlerengines dot com Web site FREE! I will also give the instructions on how to properly install your connecting rod. (Oil hole goes towards the cam) The most common reason for premature engine failure on your rebuilt engine is an improper rod installation. In my other auctions, I also offer high. Thanks, Kevin Thanks For Looking! The item “MASTER REBUILD Kohler 12HP Kohler K301 Valves tune up and carburetor also M12″ is in sale since Monday, March 18, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “bakt4kids” and is located in Wauseon, Ohio. This item can be shipped worldwide.

• Product Type: Engine rebuild
• Power: Gas
• Lawn Mower Type: Lawn Mower Parts & Accessories
• Horsepower: 12
• Model: K301 and M12
• SAE Viscosity: 30W
• Power Source: Gas
• Type: Engine rebuild
• MPN: Does Not Apply
• Brand: for Kohler

You may also like. New Carburetor For Kohler K241 K301 10HP 12HP Cast Iron Engines Carb Cub Cadet. K241 K301 K 241 301. This carburetor replaces for the Kohler/Carter Number 26 Carburetor. It has a 26mm/1.07 Diameter Throttle Bore. For Kohler K241 K301 10HP 12HP Cat Iron Engines. Replaces Part Number: 47 853 23-S. In the event the of the item fail due to manufacturing defects during intended use, we will replace the part by free. Warning: Some products can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to California goverment website, you can search California P65Warnings. For replacements, please notice us within 60 days after you receiving the item. Items are aftermarket, so, most items don’t include instructions. The item “Carburetor For Kohler K241 K301 10HP 12HP Cast Iron Engines Carb Cub Cadet” is in sale since Wednesday, July 24, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers\Lawn Mower Parts & Accessories”. The seller is “afauto2016″ and is located in Guangzhou, Guangdong. This item can be shipped to United States.

• Horsepower: 12hp
• Model: K241 K301 K 241 301
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• Power Source: Battery
• Type: Carburetor
• MPN: 47 853 23-S
• Brand: Afauto2016

Kohler cylinder head and new OEM Kohler cylinder head gasket. Head has been reconditioned by bead blasting and the mating surface machined perfectly flat. Spark plug threads are perfect as are both engine tin mounting threads. No broken or badly damaged cooling fins either. Fits K241 & K301, K321 10, 12 and 14 HP engines. Comes with a small package of anti-seize to apply on spark plug threads so that future replacement of spark plug doesn’t cause damage to threads, and two new mounting bolts for the engine tins. Everything you need to get back to work quick. This is the last style head manufactured by Kohler for the K-series engines and has the spark plug located directly over the exhaust valve. There are two reasons why Kohler did this. It prevents cold-starting incoming raw fuel from fouling the spark plug. It helps produce more engine power and torque by retaining the majority of the combustion heat in one area. Purchasing a used cylinder head which hasn’t been cleaned and properly inspected is a risky venture. Many sellers will list heads without regard to its condition. They remove the head, take a quick picture or two, then list it for sale. Some 90% of the heads we remove from good running engines are warped to some degree and are not suitable for use unless they are machined. Doing the job right the first time will increase your tractor’s productivity and ensure your engine operates up to its full potential. Did you know that carbon buildup on the cylinder head acts similar to a sponge and absorbs raw fuel which contributes to poor cold starting conditions and rough operation when engine is running? Any major tune-up should include the removal and decarbonizing of the head. Removing any paint and grease from exterior of head promotes more efficient cooling by allowing heat to travel to cooling fins where it can dissipate into the air. Never paint the head as paint holds in heat and prevents equal dissipation through the cooling fins. Always insure the engine tins are installed. They force air to flow through the cooling fins on the cylinder and the head. Otherwise air will take the path of least resistance and flow around the engine. Lastly, check the screen on the flywheel and make sure it’s clear of grass clippings and debris. Cool air is pulled in through the screen and if it’s restricted it will greatly decrease the volume of air needed for cooling. We’re proud to offer the absolute highest level of service to our customers, and we’re equally proud of what they have to say about us. We love these tractors as much as you do and take pride in the quality of used parts we sell. But if you think our price is a little too high, then submit a best offer. You’ll usually hear back from us within a few hours. We don’t sell anything we wouldn’t install on our own machines. The item “Kohler K241 K301 K321 10 12 14 HP Cylinder Head & OEM Gasket Cub Cadet Deere” is in sale since Thursday, March 23, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers\Lawn Mower Parts & Accessories”. The seller is “whatababe17″ and is located in Tyler, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Russian federation.

• Horsepower: 10, 12, 14
• Model: K241 K301 K321
• Country/Region of Manufacture: United States
• Power Source: Gas
• Type: Cylinder Head
• MPN: KH-237670 , 47 041 15-S
• Brand: Kohler, Cub Cadet Deere Gravely Wheel Horse Bolens