Low Cost Lawnmowers

This is a New Genuine OEM Kohler Lombardini Diesel Electric Fuel Shutoff Valve Solenoid ELET. 721BZ 12V NC 2F RM VALVE. This part will fit many Lombardini engines including KD15-440. The part number is ED0035871820-S. Please have your make and model information ready. Nolts Power Equipment (Formerly Perry Power Equipment)is located at 3720 Shermans Valley Rd, Loysville PA 17047. We are your source for Lawn & Garden Sales and Service.

If you did not know it. This is complete head set with Valves Spring Head gasket all part in this set listed below. FE290D-BS22 4 Stroke Engine FE290D–>CYLINDER/CRANKCASE. FE290D-CS20 4 Stroke Engine FE290D–>CYLINDER/CRANKCASE. FE290D-CS22 4 Stroke Engine FE290D–>CYLINDER/CRANKCASE. FE290D-DS20 4 Stroke Engine FE290D–>CYLINDER/CRANKCASE. FE290D-ES20 4 Stroke Engine FE290D–>CYLINDER/CRANKCASE. We at Red Rock Turf are a stocking distributor for Briggs and Stratton, Kohler, Kawasaki, and Toro. We not only sell their OEM parts we also use them on our equipment repairs and rebuilds.

· FE350D-AS09 4-Stroke Engine FE350D–>CYLINDER/CRANKCASE. · FE350D-AS12 4-Stroke Engine FE350D–>CYLINDER/CRANKCASE. · FE350D-AS13 4-Stroke Engine FE350D–>CYLINDER/CRANKCASE. · FE350D-AS14 4-Stroke Engine FE350D–>CYLINDER/CRANKCASE.

Here is a great deal on NEW Kioti Remote Hydraulic Valves! This will fit NX cab models.

Genuine Exmark Part Number:1-643234Compatible with the Following:Lazer ZLazer Z ACLazer Z XPLazer Z XSFitment can vary by sub model, serial number, and/or production date of your equipment. Please refer to the origional owners manual in order to verify this is correct part for your machine. Exmark 1-643234 Dual Flow Fuel Valve Lazer Z AC XP XS. Brand: Exmark Known Brand Compatibility, Replaces / For: Toro, Exmark Prior Numbers / Substituted Part Numbers / Replacement for: 1-643234. Genuine Exmark Toro Factory Part Number 1-643234. Compatible with Lazer Z, Lazer Z AC, Lazer Z XP, Lazer Z XS Diesel, Lazer Z XS Liquid Cooled. Genuine Exmark Part Number: 1-643234 Compatible with the Following: Lazer Z Lazer Z AC Lazer Z XP Lazer Z XS Fitment can vary by sub model, serial number, and/or production date of your equipment. This product is brand new and will come in original factory packaging. We are proud to be a factory authorized retailer. We use several different carriers and choose the most economical for the item and destination based on the estimated transit time displayed.

BACK IN STOCK For how long is the question.. This is kit style #3, a complete plug and play ” Selector valve” install kit designed for Case Ingersoll tractors ALREADY equipped with three point hitches. Three point hitch is NOT included. This is Style #3 of three different kit styles we offer based on desired valve and hose routing locations. On this style kit the selector valve and all hoses are mounted and concealed under the operators platform for later model 200 and 400 series tractors with “full fenders and full operator floor and platform” (like in photos) as well as for most 3000 and 4000 series tractors and some loaders. But for plug and play on older 200 and 400 series tractors we recommend our STYLE #1 or STYLE #2. WHAT DO OUR SELECTOR VALVE KITS DO AND ARE USED FOR? THEY LET YOU INDEPENDENTLY OPERATE YOUR 3 POINT HITCH FROM YOU MID/FRONT LIFT HYDRAULICS! WE VERY HIGHLY RECOMMEND THIS ON ANY AND ALL TRACTORS EQUIPPED WITH 3 POINT HITCHES. A MUST HAVE SO YOU CAN USE BOTH REAR AND FRONT/MID MOUNTED ATTACHMENTS INDEPENDENTLY! Lift the rear attachments when you want and the front or mid attachments when you want instead of both at the same time. Lifting both at the same time without a selector valve is unproductive, frustrating as well as dangerous. This style #3 of 3 styles we offer, again be sure to look at all 3 to see what one will work best for you! Look where the hoses and valve is located on in EACH different kit and see if you have room to mount the valve and run the hoses where they need to be for each style kit. It is up to you to pick the correct kit for YOUR tractor as they all vary to some degree. Our kits are plug and play, very simple installs with basic tools and skills. Our kits are made of top quality parts, no hacking or cutting of the tractor is necessary to install. Depending on what kit number of ours only 2 or 3 holes have to be drilled to end up with a clean professional look that will last a very long time. All of OUR hoses have expensive swivels on BOTH ends for ease of install and maintenance, also with swivels on both ends and the correct expensive hose ends on our hoses there is no need for extra adapters on the selector valve. And in most cases the other end of the hoses thread right on to your existing tractor fittings. All our fittings are quality fittings/hoses ends are made for high hydraulic pressure, NO cheap dangerous pipe fittings here. The hoses are all high quality very flexible high PSI R17 hydraulic hoses and ends. All kits Include one high quality selector valve, three high quality 1/4 hoses made to length for each particular kit install. A cap fitting for the TCV “TEE”, a 45 degree and a straight fitting that MAY need to be used depending on how your tractor already is set up. Also included is all necessary grade 8 hardware, basic hose protection for exposed portions of hose as well as zip ties for mounting and securing hoses and hose protection. Basic guidelines and photos for installation are also included. Only very basic tools are needed, most installs only require 1/2, 9/16, 5/8, 11/16, 3/4 wrenches. And possibly basic internal hex style Allen wrenches or sockets to remove plugs in Selector valve. Most installs take around 30 mins depending on skill. So we try to keep the inventory for online sales as accurate as we can. But sometimes there is an overlap. We just wanted to be upfront about that. You can message us to check current inventory. As stated this kit Style #3 and is mainly used and recommend for later 200 and 400 as well as 3000 and 4000 series tractors with full covered floor platforms like in photos. Some installers had success mounting it on earlier style and model tractors with possibly some modification to tractor foot rest and or custom hoses being made by installer at installers expense. Only the 3 included specific lengh hoses for suggested location are included. These are our 3 different style kits that we use at our shop to install selector valves on Case Ingersoll tractors/loaders equipped with HH34 and H26, J26 or LT26 3 point hitches. Used on most models made by CASE INGERSOLL from the 200, 400, 600, 3000 and 4000,4100, 4200, 6000, 7000 series tractors and their sub models. Being that they do fit many models including small and big tire models as well as long and short frame, loader tractors and multiple Case Ingersoll 3 point hitch models, there MAY BE some slack/extra length to hoses or there may be little to none at all. We have yet to have a issue using this kit on any Model Case Ingersoll models. The way you choose to route, hang, tie, secure and protect your hoses will also determine the amount of slack that is in the lines as there are many options as how to do this. Fits many of these CASE INGERSOLL Models later 200/400/600 and 3000/3100/4000/4100/4200, 6000/7000 series tractors. Case Ingersoll tractor later models of 220, 222, 224, 226 most 3012, 3014, 3016,3018,3116,3118,3120. Later model years 444, 446, 448 most 4016, 4018, 4020, 4116, 4118, 4120, 4200 series models some 644, 646, 648 some 6018, 6020, 7020 and more models. ALSO LOOK AT OUR OTHER MULTIPLE STYLE “SELECTOR VALVE” INSTALL KITS THIS IS ONLY 1 OF 3. WE ALSO HAVE THREE POINT HITCH INSTALL/MAINTENANCE KITS TOO. And many other Case Ingersoll items. It is up to you to make sure this fits YOUR tractor before purchasing, THANK YOU. What is pictured and the main item in picture (not background) is what you get, Ask If I can help you in any way. Follow us on Face Book at Case Ingersoll Garden Tractors North East. BE SURE TO CHECK OUT OUR YOU TUBE CHANNEL AT CASE INGERSOLL TRACTORS NORTH EAST. It is solely the purchaser’s responsibility to choose qualified trained professionals for correct and safe product installation and. So please feel free to ask questions if you need to and we will help to the best we can and THANK YOU. If you have any issues please reach out and contact me. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “case_ingersoll_tractors_northeast” and is located in this country: US. This item can be shipped to United States.

• Brand: Case Ingersoll
• Type: Selector Valve
• Custom Bundle: Yes

JOHN DEERE OEM HYDRAULIC CYLINDER LOCK OUT VALVE AM134625. X465, X475, X485, X485SE, X495, X575, X585, X585SE, X595, X595SE. If you have questions, or are unsure if this part will work with your machine, please message us with your model and serial number. We reserve the right to cancel the sale of any item to any person/business who is not the end user of this product. Warning: Cancer and Reproductive Harm. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “cjcgogreenparts” and is located in this country: US. This item can be shipped to United States.

• Brand: John Deere
• Type: Valve
• Model: X465, X475, X485, X485SE, X495, X575, X585, X585SE
• MPN: AM134625
• Country/Region of Manufacture: United States
• Models (continued): X595, X595SE
• Bundle Listing: No

This item is overstock merchandise and some show signs of siting for extended periods including but not limited to discoloration, scratches and dents. Please inspect all components and test them for safety. This item is brand new, but it’s packaging is gone. These were installed on machines then removed. As stated before please see all pictures and use them as part of the description of the condition of the products. 1 John Deere DC217855 as pictured. Have a great day! Thank you and God bless. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “nibop9422″ and is located in this country: US. This item can be shipped to United States.

• Brand: John Deere
• Type: JOHN DEERE
• MPN: DC217855 / P12100927

JOHN DEERE OEM RIGHT & LEFT ALUMINUM VALVE COVER KIT MIU11644 MIU11645. Includes: – Left Side Valve Cover MIU11645 – Right Side Valve Cover MIU11644 – 2 Valve Cover Gaskets MIU11646 – Oil Fill Cap M146884 – Oil Fill Cap O-ring M146888 Fits John Deere: 425, 445. If you have any questions if this will for your equipment feel free to message us with your model and serial number of your mower and we will be happy to help. Warning: Cancer and Reproductive Harm. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “cjcgogreenparts” and is located in this country: US. This item can be shipped to United States.

• Brand: John Deere
• Type: Valve Cover Kit
• MPN: MIU11644

Two 13.00-24, 14.00-24 13R24/25, 14R24/25 TR179 Grader Metal Valve Heavy Duty Tire Inner Tubes 1400-25. Type:Grader metal valve heavy duty tire inner tubes. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “lawngardentire-com” and is located in this country: US. This item can be shipped to United States.

• Custom Bundle: No
• Type: Inner Tube
• Modified Item: No
• Non-Domestic Product: No
• Brand: Justubes