Low Cost Lawnmowers

TWO STANDARD CONNECTING ROD FIT ONAN P218, P220 B48 BG48. BGA, BGAL, BGD, BGDL, BGE, BGEL, BGM, B48G, B48M, P218G, P218V, P220G, P220V, P248V, OL18, Ol20, OLV20, LX770, LXV770, LX790 & LXV790. IF YOU HAVE A EARLIER STYLE ROD THAT HAS A HOLECAST IN THE LOWER END YOU WILL NEED TO REPLACE BOTH CONNECTING RODS TO KEEP THE ENGINE IN BALANCE. LOOK AT SECOND PICTURE TO SEE THE DIFFERENCE BETWEEN NEW & OLD STYLE CONNECTING RODS. IF YOU HAVE A SOLID BEAM ROD AND NEED TO REPLCE JUST ONE ROD THEN OUR ROD WILL WORK JUST FINE, WE HAVE STANDARD. NOTE: THIS IS A GRAVITY CAST ROD, NOT DIE CAST, GRAVITY CAST IS A STRONGER ROD THEN OEM DIE CAST, CONNECTING ROD TORQUE. TORQUE ON OUR CONNECTINGS RODS IS DIFFERENT THEN ONAN SPECS, THE TORQUE IS. 22.1 FOOT ILBS. FREE PARTS AND SERVICE MANUALS ON WEBSITE FOR FREE DOWNLOAD, FREE TECH SERVICE. ALL OF THESE PRTS ARE NON TAIWAN OR CHINESE MADE.

2 CONNECTINGS RODS, 2 INTAKE VALVES, 2 EXHAUST VALVES, COMPLETE GASKET SET WITH SEALS & TWO HIGH QUALITY REPLACEMENT 68MM PISTON KITS WITH 3 PIECE RINGS FITS BRIGGS AND STRATTON VANGUARD 16HP & 18HP ENGINES THAT USE THIS PART NUMBER V TWIN ENGINES WITH A 68MM BORE, MAKE SURE YOUR BRIGGS VANGUARD ENGINE USES THESE PISTONS BRIGGS PART NUMBER 843951, IF UNSURE MESSAGE ME YOUT MODEL, TYPE & CODE NUMBERS. NOTE: THESE HIGH QUALITY MADE PISTON & RING KITS, VALVES & RODS ARE NOT MADE IN TAIWAN OR CHINA. REPLACES THIS BRIGGS & STRATTON PART NUMBER. 2- 843951 PISTONS WITH RINGS. 1- 841188 GASKET SET WITH SEALS. 2- 807900 CONNECTINGS RODS. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “llrdbrn” and is located in this country: US. This item can be shipped to United States.

• Compatible Brand: For Cub Cadet, TROY BILT, SIMPLICITY, BOLENS, MTD, TORO CRAFTSMAN, SCAG, EXMARK, CRAFTSMAN, HUSQVARNA, SNAPPER
• Brand: PERFORMANCE SAW SUPPLY
• Type: PISTONS, RODS, VALVES
• Power Source: Gas
• Horsepower: 18HP
• Number in Pack: 1
• Model: 303777
• Material: Aluminum, Steel
• MPN: 843951

Standard crankshaft, rods & pistons removed from a John Deere 425 Lawn & Garden Tractor Kawasaki FD620 engine. I disassembled & inspected it and found the internals to be in good condition. Crankshaft, rods & pistons are all standard and in good usable condition. Tractor was a 1993 model. I found everything inside the engine was in good condition other than one head bolt which was broken off inside the block! Standard pistons are JD part number. Powered by SixBit’s eCommerce Solution. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “georgiadeere” and is located in this country: US. This item can be shipped to United States.

• Model: 425
• Type: Crankshaft rods and pistons
• MPN: MIA12866, MIA12487, MIU11458
• Brand: John Deere

Aftermarket part number: 701374. Please verify your model is listed below for correct fitment. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “flipmfg” and is located in this country: US. This item can be shipped to United States.

• Brand: Flip Manufacturing
• MPN: GY21250
• Type: Steering Rebuild Kit
• Power Source: Not Available
• Length: 20.000
• Model: 701374
• UPC: 740171701893

M18 magnum 18 Rebuild includes: One Complete gasket set with oil seals Two sets of standard rings 2 sets of standard rings (3.125 inches), Please note it is very common that ring end gap may need to be set. This gets you maximum performance and end gap filing may need done as would be expected on all rebuild. Two Standard Connecting rods and I do also have piston rings and rods in. 010 but this is for standard. This kit is for all M18 or Magnum 18 engines and does not matter what the suffix is. I carry my inventory!!! The item “Kohler M18 engine rebuild kit, Gasket set, std rings, standard rods Magnum 18″ is in sale since Monday, August 5, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “bakt4kids” and is located in Wauseon, Ohio. This item can be shipped worldwide.

• Horsepower: 18hp
• Model: M18
• Power Source: Gas
• Type: Gasket
• MPN: Does Not Apply
• Brand: for Kohler

KT 17 Rebuild includes: One Complete gasket set with oil seals Two sets of standard rings 2 sets of standard rings (3.125 inches), Please note it is very common that ring end gap may need to be set. This gets you maximum performance and end gap filing may need done. Two Standard Connecting rods and I do also have rods in. 010 but this is for standard. This kit is for all KT17engines, such as KT17A, KT17S, KT17AS, KT17AQS and so on no matter what the suffix is. I carry my inventory!!! The item “Kohler Kt17 engine rebuild kit, Gasket set, std rings, standard rods” is in sale since Monday, August 5, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “bakt4kids” and is located in Wauseon, Ohio. This item can be shipped worldwide.

• Model: KT17
• Type: Gasket
• MPN: Does Not Apply
• Brand: for Kohler

ENGINE REBUILD KIT FITS KOHLER KT17, M18, MV16, GASKET SET, PISTON & RINGS. REPLACES THESE KOHLER PART NUMBERS. 25-755-37-S GASKET SET WITH SEALS, CRANK SHAFT SEALS AND INTAKE VALVE SEALS, 26 PIECE SET. 52-067-67-S STANDARD CONNECTING RODS, QUANTITY 2. 52-874-11-S STANDARD PISTON KIT WITH. 52-108-09-S PISTON RINGS, YOU WILL RECEIVE 2. RING & PISTON SETS THAT ARE NOT MADE IN CHINA OR TAIWAN. THE GASKETS ARE MADE TO RESIST OIL AND CHEMICALS, HIGH QUALITY. STOCKED & SHIPS FROM USA. NOTE: YOU WILL GET ONE SET PISTON KIT AS SHOWN IN THE PICTURE, STANDARD PISTON. SPECIFICATIONS ON THESE KOHLER PISTONS PER KOHLER SERVICE MANUAL. STANDARD BORE 3.125″ PISTON MEASUREMENTS 3.119″-3.117. 010″ OVERSIZE BORE 3.135″ PISTON MEASUREMENT 3.129″-3.117″. 020 OVERSIZE BORE 3.145″ PISTON MEASUREMENT 3.139″-3.137. 030″ OVERSIZE BORE 3.155″ PISTON MEASUREMENT 3.149″-3.147″. CLEARANCE BETWEEN PISTON AND CYLINDER WALL. SERVICE MANUAL ON LIL RED BARN WEBSITE FOR FREE DOWNLOAD. The item “ENGINE REBUILD KIT FITS KOHLER KT17, M18, MV16 GASKET SET, PISTONS & RINGS, RODS” is in sale since Tuesday, August 6, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “llrdbrn” and is located in Harrisonburg, Virginia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Ukraine, Cayman islands.

• Horsepower: 17, 18, 16
• Model: KT17, M18, MV16
• California Prop 65 Warning: California Proposition 65 requires businesses to provide warnings to Californians about significant exposure to chemicals that cause cancer, birth defects, or other reproductive harm. Add details about the warning you want to show California buyers. We’ll add a warning symbol and the word ‘WARNING:’ before the description you enter here, and well add ‘For more information go to www.P65Warnings.ca.gov’ following your description.
• Power Source: Gas
• Type: PISTONS, RODS,GASKET SET
• MPN: PISTONS, RODS,GASKET SET
• Brand: PERFORMANCE SAW SUPPLY

New Assembled Engine Long Block! Crankshaft Diameter = 1 Inch. This is a KEYED crankshaft. Will not work on generators with a TAPERED shaft. Modification may need to be made to crankshaft for plate compactor machines. WILL NOT WORK ON GEAR REDUCTION ENGINES. 1x Complete Assembled Engine Long Block. (includes fully assembled left and right cylinder head). Everything included in the engine block! Exhaust Valve Cap may not be installed but included in package. Please double check valve specs and adjust appropriately. Save Hours Of Time On Installation! COMBINED ORDERS: We will combine all orders when possible. The item “New Assembled Long Block For Honda GX620 Crankshaft Piston Rods Cylinder Heads” is in sale since Monday, June 10, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “everestparts248″ and is located in Sarasota, Florida. This item can be shipped worldwide.

• Brand: Everest Parts Supplies
• Type: Crankshaft
• Power Source: Gas
• Model: GX620 20HP
• MPN: Does Not Apply

Flip Manufacturing part number: 701374. Please verify your model is listed below for correct fitment. The item “Steering Rebuild Kit includes Spindles Tie Rods Sector fits John Deere LA Series” is in sale since Wednesday, May 23, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers\Lawn Mower Parts & Accessories”. The seller is “flipmfg” and is located in Greenville, Texas. This item can be shipped to United States.

• MPN: GY21250
• Brand: Flip Manufacturing
• Bundle Listing: Yes

PLEASE MAKE SURE THIS IS EXACTLY WHAT YOU WANT. HAS HEADS, OIL BASE, crankshaft, pistons, rods, valves, oil pump , bearings and other inside parts. FITS MANY CCK ENGINES. I have a chart of all of the spec numbers that apply to this CCK block. On the top of the block the casting number is 2214 – with a 25 underneath it. That is the only ID number that I can find on the block itself. I measured from the oil base gasket to the top of the. Only and it is 8″ I measured from the oil base gasket to the timing lever, that is 10-3/4″ and then to the very top of the timing lever mechanism it is 11″, and then to the top of the breather tube it is 13″. All of these measurements are plus or minus 1/16″ to 1/8″, so be careful. The overall width of this engine head to head is 19-1/4. The crankshaft that comes through the timing cover is tapered from 1″ diameter at the end to 1-3/16″ diameter at the bearing and is 1-7/8 long. The crankshaft on the other side is tapered from 1-1/2″ diameter at the end to 1-5/8″ diameter at the bearing and is only 1-1/8 long. The following Onan short blocks and parts are also available. Please contact me if you see something you need in this list. If you have further information regarding this or another item I have for sale, please feel free to let me know so that I may post it here for buyers who may not have such information. NOS means new old stock. These are items that are still in new and unused condition that have been on the shelf or in storage for a number of years. Most of my items are in the original factory boxes or cases. I try to add to my store listings all the time. Please keep in touch. I will answer all emails to the best of my ability. Please send part numbers when inquiring about certain parts. The free listing tool. The item “110-2005 CCK ENGINE LONG BLOCK ONAN 110-3422-11 110-2005 heads, base, rods NOS” is in sale since Sunday, April 01, 2012. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawnmowers\Parts & Accessories”. The seller is “mikes_garage_sale” and is located in Osceola, Indiana. This item can be shipped to United States, Canada.

• Brand: ONAN
• Model: CCK
• Item Condition: New
• Power: GASOLINE
• MPN: 110-2005
• Country/Region of Manufacture: United States