Low Cost Lawnmowers

Our mower lift is an ideal tool for maintenance and care. It is a universal, stable and durable lifting tool and is suitable for all mower models on the market. With the lever system of this jack, you just have to turn the crank without any effort. Made of resistant steel, our mower lifter very robust and can safely carry up to 882 Lb. Our telescopic mower lift allows you to save more than 30% of storage. This tractor lift can be installed for 5 minutes by following just 4 steps. Our tractor lifter is made of sturdy steel, which can not only prevent rust to extend the service life, but also ensure safety during use. Our tractor lift is equipped with a safety lock to secure the crank. Please do not use the tractor lift if the rod is not properly seated in its location. Our tractor lift can withstand a very heavy load, up to 882 lb without any worries. The floor supports of the lifting platform ensure a secure stand and when not in use, the jack aid can be folded compactly and stowed away to save space. For jacking mowers, small tractors, ride-on mowers, lawn tractors, quads etc. An additional power tool connector is included. You can use a power tool to speed up the lifting process. Load up to 882 lbs. Tilt angle continuously adjustable up to 35°. Steel tube frame 1.18 in. Assembled Dimensions (L x W x H): 45.6 x 20 x 39.7 in. Maximum Tire Width:38 in. Surface material:Co-Friendly coating. 1 x lawn mower lift jack. 1 x upgrade head.

We are offering our “GEEZER BAR” ™ Senior handhold bar that is attached on the front floor plate on the 2023 & 2024 Deere. Zero Turn Mowers Mod’s. Z515, Z530, Z545, that allows you to have a sturdy grip with both or one hand when entering and exiting the deck to. This is not an OEM accessory, nor is it approved or disapproved but is designed and manufactured by a Senior. It fits all models using the Deere Part # AUC 18300 Floor Plate, which you should check. In the parts manual. It easily attaches using existing holes with (2) 3/8″ x 1″ Stainless cap screws and nuts provided. The handle is yellow powder coated. This is the only full width front mounted handle to assure either hand added stability for our seniors!

Seat Suspension Kit for Zero Turn Lawn Mower Tractor for John Deere, Hustler, Z TRAK, Kubota, Exmark, Smooth and Comfortable Ride, Max 275 lbs. The suspension does not fit every model of every brand mower listed in the title. NOT fit for John Deere Z Trak 200, 300, 400, 500, 600 series mowers. NOT fit for Toro Timecutter residential mowers. Smooth and Comfortable Ride? Seat Suspension Kit for zero-turn lawn mowers that be installed between the seat and slide tracks and transform your rough riding mower seat into a smooth riding suspension seat. Provides maximum ride comfort, giving you a smooth ride and reducing operator fatigue when mowing for long periods of time. Seat suspension adds 2.75″ to your seat height and maximum weight capacity is 275 lb, 1″ Suspension Travel. Adjustable weight/ride control allows you to adjust easily for a smooth ride by turning the dial to “FIRM” or SOFT. The suspension can withstand large impact loads and absorb vibrations, providing the operator with additional support when traveling over uneven terrain. Please Check Before Purchasing? Measure the bolt pattern on seat bottom, 11.5″ front to rear and 10.69″ to 11.25″ or 9.5″ side to side. Slide tracks are required for installation. If not, 1/2″-3/4″ spacers and possibly longer bolts are required. Check your seat safety switch, if protrudes beneath the seat bottom, spacers will be required between the seat and suspension kit. Some models require extended safety switch wires. We will try our best to solve your problem. Please allow 10-30 days for international deliveries. United states 2-5(days). It is important that we know when your return is expected. We need this in case there are any issues during transit. Good communication is helpful for both of us to resolve any problems and issues. If you are satisfied with our service, please kindly leave us a 5-star feedback.

Trac Seats Low Profile Seat Suspension Kit. Universal mounting holes (Some drilling may be required). 275 lbs max capacity. 1 suspension travel. Mounting Hardware included. ? This suspension is designed to fit between your seat and the seat sliding rails. To ensure this unit will fit your vehicle, measure the bolt pattern connecting the seat to the sliding rails. ? Not Compatible with the John Deere Z Trak 200, 300, 400, 500, & 600 series mowers or Toro Timecutter residential mowers. ? Vehicle must have sliding tracks for suspension to work properly. Please check the Technical Drawings in the photo section to view the bolt mounting patterns. TracSeats Low-Profile Mechanical Seat Suspension adds a suspension ride to a non-suspension seat with minimal height increase. Self-lubricating bearings with weight ride adjustment control. Works with many non-suspension seats; great for commercial turf and rough terrain forklifts, skid-steers, compact rollers and small tractors. This suspension is made in the USA and is used by most name brand zero turn mower companies. It has a universal type mounting and fits a lot of name brand mowers, but some models vary due to year changes. This suspension will not fit all models. It only takes us a few minutes to process, pull, label your order and update your account. Thanks for shopping with TracSeats.

Your seat will come to you UPS Ground from our warehouse in Memphis, TN 38106. Premium high back seat featuring high density foam cushion, heavy duty vinyl (Black) and integrated suspension. Fits many Zero Turn Mowers (ZTR) and skid steers. High Density Foam Cushion. Integrated Suspension (1-1/2 travel). Contoured Base for Water Drainage & Airflow. Accepts Delta-type Operator Presence Switch. Zero Turn Mowers (ZTR) Skid Steers. Basic Dimensions: Seat Height: 24″ Max Seat Length: 24-1/2″ Seat Width: 24 (with armrest). Bolt patterns: 11.25″ x 11″ Fixed Studs. If we are out of stock on an item please be understanding. We will contact you and let you know how long your back order will take. Most orders will not be effected by this. We do not offer pickups. It is very important that you leave this information once the order is complete and you have received your items. We must receive payments within 7 days or our system will file a NPB complaint. We are not perfect but we can correct our mistakes.

Your seat will come to you UPS Ground from our warehouse in Memphis, TN 38106. Seats Unlimited adjustable mechanical suspension system for Tractors and Zero Turn mowers. Features height adjustment and operator weight adjustment. Recessed Location for Slides. Multi Bolt Patterns for Mounting Surface. Check Bolt Pattern to Ensure Proper Fit. Tractors, Zero Turn Lawn Mowers and Industrial Applications. Basic Dimensions: Max Height: 8 Min. Height: 5″ Length x Width: 15″ x 10. Bolt patterns: See Photos above. If we are out of stock on an item please be understanding. We will contact you and let you know how long your back order will take. Most orders will not be effected by this. We do not offer pickups. It is very important that you leave this information once the order is complete and you have received your items. We must receive payments within 7 days or our system will file a NPB complaint. We are not perfect but we can correct our mistakes.

StreetRays [Originals] Swivel Chute Blocker Plate FOR Exmark Lazer Z 48″ 52″ 60 Zero Turn Mower. All StreetRays [originals] parts are CNC cut right here in Central Texas, USA. Where precision & Quality finish is the main focus. Our parts are all Laser cut & CNC formed on our Amada press brake for reliable fit. Our Swivel (open / close) Chute Blocker Plate fits all Exmark Lazer Z Next Gen mowers (NOTE the deck size) for deck sizes 48″, 52″ and 60 typically years 2011-present. The installation is really easy. Simply unbolt the factory chute by undoing just a few bolts and attach our chute blocker plate with the provided nylon locking hardware and you’re done! Please note that you should NOT tighten the nuts all the way tight because the nylon locking nuts will ensure they stay in place, you need the nut to be loose because that’s how the chute blocker can open and close without interference. Now you have mulch machine! Or rather, you have a zero turn mower than won’t throw rocks or any hazard randomly at your house / car / window / etc. This is essential when you’re working on long overdue / heavily grassed / weeded areas.